How To Remove The Interior Door Panel For A Car

The clips will unsnap and the panel will come right off.

How to remove the interior door panel for a car. Disconnect the small plastic connector clips holding the door panel in place by pulling the door panel straight out using 1 swift motion. Grasp the handle and remove it by pulling upward. They re easy to remove and reinsert if you use the right tool.

Then pop loose the door panel clips by using a broad blade screwdriver or u shaped clip lifter tool. If you don t you ll destroy the fastener and possibly damage the panel. Remove door trim handle cover this is the trim surrounding the window switches this is done by wedging a plastic card starting from the bottom and working around it until it unclips itself 3.

Pull the door panel straight out with your hands to remove it. Please do your research before investing this is not considered investment a. To remove the door panels you need to remove the armrest window crank door handle and any other hardware first.

You want to start off by removing the interior door pulls this is done with a torx screw underneath the door handle. Use a small screwdriver to push the plastic clip over the linkage and release it from the handle. With one hand firmly pushing in on the middle of the panel use another hand and pull the bottom of the panel to unclip the clips holding the panel onto the car.

Removing interior panels in your vehicle is easy when you use a fine touch and proper tools. Learn small tricks to removing any panel in your car or truck. For best results use the proper tool to remove panel clips.

With the door panel removed now is a good time to lubricate and make any necessary repairs to the window and door mechanisms. Be cautious of the linkage attached to the handle as not to bend or break it. Remove any screws holding the inner door handle.